Movements: Outcome 3

Dialogue Studio, Movements

I thought the printing process would be pretty straightforward, I had my paper and my pdf and my print credits. But printing proved to be difficult. First try came on landscape on a portrait oriented sheet of paper, second one came out with the poster on the back the wrong way round, which I didn’t notice until I started to fold my A2 down to A5 and fold up the flap on the first page that reveals the introduction text to the zero movement underneath (a feature I added to make the design more dynamic and again make it more dramatic with a “reveal” kind of) and the text wasn’t there. Sigh. A shame because the registration for the front and back images was almost perfect. Third try came out the way it should (after I rotated the back poster in ID cause I thought that might fix the previous problem, but now I’m not sure that was the actual problem. Maybe that could have been solved by rotating it in the print preview or rotating the paper. hmm…) but the problem now was that the registration between front and back was off by one cm. So a lot. Way annoying.

Pager from both sides, by Lisa

So the cover is now sporting a vertical white line that is not supposed to be there and the letterpress image sits a bit too tight to the folded up flap on page one. But I am going to leave it like this because everything else is how I wanted it to be and I cannot afford to print it again. I don’t love it, but I like it! But I almost think it looks better as a flat poster than folded up because it just makes so much sense now. And the Zero movement kind of didn’t and the design seen laying flat as an A2 is almost more representative of that. The kinetic type poster though I think looks great.


Front and back cover, by Lisa

Movements: Development 5

Dialogue Studio, Movements

Just before I went to print my pager, I changed my cover a final time after a series of tests because I wanted to incorporate more of the light aspect of the Zero movement. So I took some experimental photos of the shadows created when lifting the cut out pattern I did  a couple of weeks ago and really liked how they turned out so I decided to use that. Playing around with how to place it I eventually made up my mind on a design and stuck with it. The problem I have had with the red bit in the pager I tried to solve by taking the red completely off and focusing on grey instead so I did some tests with a drawing I did a couple of days ago where I using my fingers, created shadows on silver lines so the image looked like waves. Tried to place it in my layout in several different ways but none of them felt right so I ended up deleting that image completely and instead using the cut out pattern I used for the cover so they link.

Cover trials and layout decisions

And this is the final design:

Movements: Development 4

Dialogue Studio, Movements

Designing the layout for the final outcome took way longer than what I thought it would hah! I just couldn’t make up my mind because every time I printed it I found things I didn’t like about it. It is so different to see a thing on screen versus when it’s printed and you actually hold it in your hands, it changes its appearance so much. Anyways- I started out using the colours silver and gold a lot but pretty quickly realised it wouldn’t look good printed and scratched that idea. Then I moved on to adding red as I thought that would be good representation of the monotone in the movement. I kept the red in there for a long time but altered other things about the layout so it wouldn’t look too boxy and kept some images overlapping the folds so it flowed better and represented the movement more. Here are all my tries!

Fil 007

First try, gold and silver and red 

Movements: Development 3

Dialogue Studio, Movements

Screenprinting! Starting to create my design for this I took inspiration from these two sketches I quickly did a couple of days ago in a sudden rush of inspiration where I tried to make the Zero expression more contemporary in a way, or pop-y but still keeping the zero vibe.

Zero poster sketches, by Lisa

My first attempt seen below too the right worked okay, I imitated one of my letterpress results from a previous workshop, but it didn’t vibrate enough so second attempt seen to the left was an experiment in creating more fluid lines that more resemble some of the tests I created with my blue and black Klein experiments. Way better results! More alive and with more movement so that’s what I went for, for the final print in two colours.

Ideas for screenprint, by Lisa

Movements: Development 2

Dialogue Studio, Movements

Today I have been working with kinetic typography and making a video reflecting my movement. Started out by researching kinetic typography and found the Swiss designer Dominique Schmitz very inspirational. Similar to the Zero movement his work is full of lines and overlapping elements creating vibration and movement and I especially liked these two seen below. Even the colours are right. Initially I wanted to create something like the left example as it feels like a modern spin on what I am looking into but then I started thinking about type as image and got more interested in how I could use type to create pictures and started sketching with the letters I, Z and O.

Work by Dominique Schmitz

Movements: Development 1

Dialogue Studio, Movements

Decided to develop some of my letterpress work into more refined outcomes so I made some posters out of them that reflect the Zero movement; focusing on repetition and the monochrome and creating light. The two last ones are developments of my own tests from a previous post where I made my own Klein inspired paintings.

Zero posters, by Lisa

I quite like these results! It’s a bit tricky to capture the design of the movement without making it look like copying but I feel like these both are zero and my own aesthetics at the same time.

Map of Me: Visual Identity Book 2

Dialogue Studio, Map of me

So my initial designs for the book were super boring. Everything I created looked dead and like it would be better off thrown in the bin. I started out making a book I thought I could get printed with Blurb where the minimum to print is 20 pages, but realised I cannot fill 20 pages for this project so I decided to make my own A5 booklet instead. That design came out just as awful- it didn’t look remotely thought through and just all in all very un inspiring as seen below:

First and second book design, by Lisa

So after getting some help and feedback from a friend about what I could do to change this, I decided on making a concertina A4 thing instead and when I started designing that, everything just fell into place. It was instantly more fun to design and I could play with the format more, making it fit my app better as well.

Screen Shot 2017-04-12 at 12.20.14 PM

This is in A1 size so it makes to folded A4 books which I then could make a cover to as well to make it more stable and so it s able to stand up. The only thing that concerns me a bit is if I have enough information on here but I think I ticked the most important boxes anyways so off to print!

Movements: Research 4

Dialogue Studio, Movements

Experiments with letterpress to generate some ideas that reflect my movement. Started out with the word zero and then thought about the countdown to zero as well so I incorporated numerals too. The most ideal typeface to use for this had been Futura but as that wasn’t available, the closest I could get was Gill Sans which because of the super round O works pretty well (although the fancy R annoys me somewhat).

Sketchbook, by Lisa

Then I started thinking about using the letters as shapes instead and made patterns with o and i which turned out pretty interesting. I really like the zero123 but also the red lines below and the pattern to the left of it. The countdown reflects the movement very well and the launching of a new way to look at and create art so using numbers in this way is something I could develop and refine to make it work better. Using Futura might make all the difference. 

Movements: Research 3

Dialogue Studio, Movements

I have been looking more into the zero movement and especially the works of Yves Klein. Klein was maybe the most experimental out of the people associated with the movement and the real motor, working a lot with performance, sculptures and experimental painting. He painted using his hands, people’s bodies, fire and was obsessed with blue as he saw it as the perfect colour.

Works by Yves Klein

I looked into Heinz Mack’s work more as well. He does installations, sculptural work, textures.. but the thing I am interested in the most is his work with lines and his passion for making vibration. Pretty abstract and strange sounding maybe, but looking at his work it makes more sense:

Google Engage: Development 7

Dialogue Studio, google engage

To drive this project further forward, I decided to investigate 3D printing the pavilion but after testing drawing the shapes I needed to build it in 3ds Max, I am thinking about going a different way. The program was too complicated for me, and even though I had a tutorial beforehand, I didn’t manage to create what I wanted and after an hour of pure frustration I had to give up.


The super weird shape I managed to make in 3ds Max..

So, even if I am not 3D printing anything I thought I could still build the pavilion digitally and use it for my explainer video as I am not liking the way the paper one looks. It would also be cool and more developed if I made something the camera could pan in to so it feels like you are walking through the pavilion- like how it is supposed to work in real life. Makes more sense. So I turned to sketchup instead and found that easier to master so after a couple of hours I had the model done. The design is different to my paper model though as I couldn’t make all the shapes I wanted and had to change around some things.